High Vacuum Turbine Oil Purifier with Fully Automatic Operation System

High Vacuum Turbine Oil Purifier TY-10(600LPH) with Fully Automatic Operation System is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil.

This series, which can rapidly and effectively remove the water, gas and impurities aiming at turbine oil’s nature of high water content, easily emulsified and high impurity content, make the oil reach new oil standard.

1. Breaking emulsification thoroughly with high- molecule polymeric material, the value of breaking emulsification ≤15min (GB/F 7305).
2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water.

3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).

4. With the trapezoidal, spiral, automatic back flushing system.
5. With the advanced dielectric condensation devices.
6. On-line oil purification can be carried out with turbine or water turbine automatically without any person.

1. This machine breaks emulsification thoroughly, and the oil is very difficult to be emulsified again after treatment. Its dehydration volume is large and it can drain off the water on line.

2. "T" shape oil vacuum chamber, expanded evaporation area, improved the oil dehydration and degasification effect.

3. PLC programing and big touch operation screen, make the operation more easily.Performance:

WATER REMOVAL Down to less than 50 PPM or less.

3. Fully automatic water discharging. This purifier is controlled by PLC system, the water removed from the oil will be discharged from the water tank fully automatically.
4. It is equipped with 4 castors, very convenient for movement.
5. It’s easy and simple to move and operate the machine.